When the battery reaches 10%, you can record for up to an additional hour. When you recharge the device and sync the recording to the app, the recording date will remain the same as when the device had power.
For PLAUD NotePin with battery below 10%:
- If the device is not bound: The white light will flash, and every 2 seconds, the purple light will blink twice.
- If the device is bound: Shake the device to wake it up. While in standby mode (white light constantly on), the purple light will blink twice every 2 seconds.
- In recording mode: The red light will stay on, and the purple light will blink twice every 2 seconds.
- In fast transfer mode: The blue light will stay on, and the purple light will blink twice every 2 seconds.
- When the battery runs out during recording: The audio will be saved to the device before it shuts down.
For PLAUD NOTE with battery below 10%:
- If the device is bound: Press the record button, and the purple light will blink for 5 seconds.
- When the battery runs out during recording: The audio will be saved to the device before it shuts down.
For best results, it’s recommended to charge the device as soon as you see the low battery warning.