If the recording time of your PLAUD device is short, please do the test below:
1. Fully charge your PLAUD device(after the LED turns green, continue to charge for 15 minutes).
2. Reset your PLAUD device. You can refer to:
3. Start recording until it runs out of battery.
4. Recharge the device and reconnect it to the PLAUD App to transfer the recording.
5. Check the duration of the recording. If it lasts longer than 15 hours, the device functions normally.
Note: Winter temperatures must be considered. Cold temperatures can lead to rapid discharge. The ideal temperature for using a PLAUD device and conducting this test is approximately 25°C to 35°C.